Tel: +1(284)494-2830

Tel: +1(284)494-2830

M150C13: 150 kW @ 1800 rpm

  • Replaceable, wet cylinder liners for long life and low rebuild costs.
  • Torsional crankshaft dampers help ensure smooth operation.
  • US EPA Tier III compliant.
  • Large capacity oil pan.
  • Two thermostats for quick warm-ups and safety.


Northern Lights M150C13

Product Details

Reliable marine generator for use in rough conditions. Smooth operation and long life cycle.

Engine Block

  • Six cylinder, four cycle, in-line, liquid cooled, overhead valve, marine diesels based on heavy-duty industrial engine blocks.
  • Balanced, forged crankshaft with induction hardened journals and rolled fillets for long life.
  • Replaceable, wet cylinder liners for long life and low rebuild costs.
  • Bimetallic valves with chrome stems and rotators.
  • Replaceable valve seats and guides.
  • Three ring aluminium alloy pistons with Ni-Resist insert for the top ring. Keystone piston ring reduces carbon buildup under light loads.
  • Torsional crankshaft dampers help ensure smooth operation.
  • A single poly-vee drive belt powers the alternator and jacket-water pump.

Fuel System

  • High pressure common rail fuel injection for smooth, clean delivery.
  • Direct fuel injection systems.
  • Ring clamp fuel filters with air bleed and drain.
  • Electric fuel pump integrated into primary fuel filter. Computer controlled priming for ease of operation.

Lubrication System

  • Positive displacement gear-type oil pump.
  • Full flow, spin-on oil filter.
  • Jacket-water, plate-type, full flow oil cooler reduces heat and prevents lube oil breakdown.
  • Large capacity oil pan.
  • A closed loop crankcase vent traps oil vapor to keep the engine room clean.

Air System

  • Dry air filter silences intake noise.
  • Turbocharger with jacket water cooled turbine housings for safety.
  • Jacket water aftercooler provides optimized combustion and output. No second keel cooler needed.

Cooling System

  • Keel cooled with heat exchanger option.
  • Gear driven, belt-less sea water pump with flexible impeller made of bronze and stainless steel.
  • Cast iron expansion tank with brass filler neck.
  • Two thermostats for quick warm-ups and safety.
  • Cast-iron exhaust manifold for reliable temperature control.

ESP and DC Electrical System

  • Negative ground, 12 volt DC system has circuit breaker, starter motor and alternator with regulator.
  • Low oil pressure and high coolant temperature safety shutdown system.
  • Optional control panels help you specify the amount and type of information required. Comprehensive list of optional alarms and safety shutdowns.
  • Optional DC logic system for simplified maintenance.
  • Optional pre-wired engine, panel with terminal strips.

AC Generator

  • Direct coupled, single bearing, 12 lead, reconnectable AC generator. Maintenance free brushless design.
  • All NL generators meet or exceed class society standards with Class “H” insulation, accessible diodes, oversized ball bearings, marine grade shafts and conservative 90°/50° heat rise ratings.
  • Engines and generators are torsionally matched for long life.
  • Automatic voltage regulator; ±1.5% regulation over the entire range from no load to full load.
  • Configured for 0% isochronous droop with integral electronic governor control supplied by ECU.

Special Equipment

  • US EPA Tier III compliant.
  • Welded steel base frame.
  • Belt guard.
  • Center bonded vibration isolation mounts.

Return to main generator page


PO Box 850
Road Town, Tortola
British Virgin Islands, VG1110

Tel: 284 494-2830
Fax: 284 494-6972


Join us on Facebook
Visit our Blog (News)
Follow us on Twitter
Email us


Terms of Use

Privacy Policy




About Us




Price List



Contact Us

Dealer Locations


Copyright © 2007-2018 Parts & Power Ltd., All rights reserved.