Tel: +1(284)494-2830

Tel: +1(284)494-2830

Bypass Isolation Transfer Switches

The bypass isolation switch is designed for applications where maintenance, inspection and testing must be performed while maintaining continuous power to the load. This is typically required in critical life support systems and standby power situations calling for safe system maintenance with no power disruptions.

Contactor Bypass Isolation Transfer Switches

The unique Eaton design includes separation between control and power components. The ATS and Bypass isolation contactors are mounted in separate compartments with protective barriers between them which prevents the possibility of contact with the rear-mounted power connections to the contactors.

Features:

  • A Bypass Isolation Transfer Switch may be used to provide emergency power to life safety and other critical loads where maintenance of the main transfer switch, without interruption of power, is either desirable or required.
  • Eaton's Contactor Based ATS with bypass isolation is rated for 100-1200A up to 600V and 1600A up to 480V. It is available in delayed or closed transition.
  • UL1008 and CSA 22.22 No. 178-1978 listed.
  • Front accessible with top and/or bottom entry.
  • Optional Dual ATS capabilities. Dual ATS technology allows both the ATS and the Bypass switch to operate as automatic transfer switches.
  • Draw-out capabilities on both ATS and Bypass compartments.
  • No service interruption when transferring to bypass.
  • Power switching devices interchangeable between ATS and Bypass portions.
  • Reliable microprocessor logic.
  • White interior for improved visibility during maintenance.

Magnum Bypass Isolation Transfer Switches

The Magnum Transfer Switch design may be applied to such applications ranging from 200 amperes up to 5000 amperes. It is possible to use the Magnum design bypass section for a full load transfer to the alternate source without being hindered by interlocking used on some contactor-type designs.

Features:

  • Eaton's Magnum Based is rated for 200-5000A in Open, Delayed or Closed Transition configurations.
  • Eaton's Magnum Transfer Switches are UL 1008 listed with a thirty cycle short time rating. In addition, the use of optional electronic trips allows performance curve shaping to facilitate proper system coordination and application.
  • Rear/side/top or bottom entry cable access with an option front access cubicle.
  • Reliable microprocessor logic.
  • No service interruption when transferring to bypass.
  • Power switching devices interchangeable between ATS and Bypass portions.
  • Draw-out capabilities on both ATS and Bypass compartments.

Contact Parts & Power today for all your Eaton transfer switch requirements.

CONTACT US


PO Box 850
Road Town, Tortola
British Virgin Islands, VG1110


Tel: 284 494-2830
Fax: 284 494-6972


info@partsandpower.com

SOCIAL


Join us on Facebook
Visit our Blog (News)
Follow us on Twitter
Email us

LEGAL


Terms of Use

Privacy Policy

Cookies

SITE MAP


Home

About Us

Products

Manufacturers

Services

Price List

Testimonials

Customers

Contact Us

Dealer Locations

Newsletter

Copyright © 2007-2017 Parts & Power Ltd., All rights reserved.